Atlas Sound FAPSUB 8 inch In-Ceiling Subwoofer
The Atlas Sound FAPSUB 8 inch In-Ceiling Subwoofer provides the low-end response that you desire in a package that takes up absolutely no floor space. That's because this is an In-Ceiling Subwoofer that is designed to be flush mounted, away from view in your ceiling! How's that for discreet! The Atlas Sound FAPSUB 8 inch In-Ceiling Subwoofer is what you have been waiting for!
JBL PRX418S 18″ Passive Subwoofer
The JBL PRX418S 18″ Passive Subwoofer that was created to be combined with any JBL two way satellite speakers. The JBL PRX418S provides you with a sub/sat system that can generate 135 dB of full-range, super high audio quality.
-1200W of ultra-efficient Class-D Fast Recovery amplification
-600W RMS / 1200W peak power
-128dB SPL max output (peak @ 1m)
-36Hz – 145Hz operating range
-15″ high-output woofer with 3″ voice coil
-Active electronics provide complete system optimization
-Symmetrical Linkwitz-Riley crossover (100Hz, 24dB/octave)
-Precision tuning filters for ultra-accurate bass reproduction
-Phase alignment to perfectly complement Mackie full-range loudspeakers
-Ported, direct-radiating design for maximum punch and low-frequency extension
-Designed and tuned by Eastern Acoustic Works (EAW)
-Dual XLR inputs, full-range and high-pass outputs for mono or stereo setups
-Level control and polarity invert switch with LED indicator
-Signal/limit and thermal LED indicators
-Integrated protection and limiting circuitry
-Rugged all-wood cabinet (15mm birch plywood)
-Pole mount receptacle for mounting full-range speaker
Soundtube Cm1001d-t one 10 inch polypropylene cone with a butyl rubber surround on a reinforced ABS baffle. High output and maximum efficiency with an accentuated 70 Hz peak to maximize listener’s low-frequency experience. Extra-large SoundTube-specific 12.9 liter steel deep can for quality bass response. Soundtube Cm1001d-t rapid-installation, blind-mount, fixed-wing mounting mechanism with constant-tension design affixing to ceiling thicknesses ranging from 0.25 inch (6.4 mm) to 1.91 inch (48.5 mm). Easy-access five-position tap switch for 25-, 70.7-, 100-volt and transformer bypass position. Steel grille with protective powder-coated finish for lasting durability plus a tool-free strap for easy installation. Baffle-mounted, flared and tuned port for maximum efficiency and frequency response. UL 1480 (UEAY) and 2043, CE (EMC Directive 89/366/EEC, EN55020, EN55013) approved. Included accessories: Color-coded (purple) tile bridge, grille, UL-rated cover plate, four-pin Euro block, paint shield and restraint cable.
Soundtube Cm1001d-t is a 10-inch. blind mount in-ceiling subwoofer tuned for maximum output and performance across the operating bandwidth. By incorporating a 10-inch polypropylene woofer and a butyl rubber surround in a tuned and ported enclosure, this speaker delivers maximum low-frequency and high SPL. Mounting Hardware is included and features a constant tension fixed wing mounting systems with a 21 gauge full metal steel tile bridge, ensuring rapid and secure installation in any sheetrock or drop tile application. Restraint cable included for easier installation.
Soundtube Rs1001i-II-t one 10 inch polypropylene cone with a butyl rubber surround attached to reinforced baffle. Baffle-mounted flared and tune ports for maximum efficiency and frequency response. Soundtube Rs1001i-II-t high output and maximize listener’s low frequency experience. Rs1001i-II-T 150 watt, low insertion loss transformer with an easy access, five position tap switch for 25, 70.7, 100 volt and 4 ohm bypass transformer. Weatherized components including power coated steel grille, hanging hardware and durable abs enclose for indoor and outdoor applications. Soundtube Rs1001i-II-t UL listed hanging hardware with high quality cables and integrated speed clamp, self locking wire clamp for fast easy and secure installation.
The Soundtube SM1001p is a powered surface mount or freestanding subwoofer with a 10-inch active polypropylene woofer and a 10-inch polypropylene passive radiator to deliver maximum low-frequency response down to 41 Hz (- 10 dB). Mated to a steel basket and an MDF and plywood enclosure, the SM1001p delivers serious low frequency punch (111 dB max. SPL) with minimal distortion.
Engineered with a 200-watt Class D amplifier, a 70.7-volt high level input and full-range balanced XLR outputs, the SM1001p offers a user selectable 50 Hz to 200 Hz high-pass filter and a 0°/180° phase switch. Safety hardware is included and optional surface and corner mounting brackets can mount to walls, ceilings or other rigid structuresSoundtube Sm1001p powered subwoofer with one 10-inch active woofer and one 10-inch passive radiator, incorporating a 200-watt Class D amplifier. Polypropylene woofers with butyl rubber surrounds mated to steel baskets. Solid cabinet with textured paint finish. High output and maximum efficiency with an accentuated 70 Hz peak to maximize the listener’s low frequency experience. Powder-coated steel grilles provide lasting durability. Inputs include a balanced XLR and 70.7-volt high-level binding post input. More versatile with 70.7v high level input for adding powered bass in distributed systems. Full-range balanced XLR output with selectable 50 Hz to 200 Hz high-pass filters with full range LFE position. 0°/180° phase switch. Included accessory: Safety cable and forged eyebolt.