PERFECTION OF COMPACT ANALOG MIXER DESIGN
Mackie relentlessly pursues the perfection of the compact mixer. VLZ4 ups the level of sonic quality at every level, featuring Mackie’s flagship Onyx mic preamps and premium components from front to back. The result is the most rock solid, the most easy to use and, yes, the best sounding compact mixer ever created.
The Mackie Big Knob Studio Command System is a basic but powerful desktop audio control center. It lets musicians and engineers get right to work making music in 4 different ways: level control, studio monitor selection, input source selection, and talkback and headphone control.
Mackie C200 10″ 2-Way Compact Passive SR Loudspeaker the ultra-portable Loudspeaker will sound great on stage, in a restaurant, or in a studio. The Mackie C200 10″ 2-Way Compact Passive SR Loud Speaker was designed with plenty of options. Hang it up on a wall to make it less visible. For installations , set it on the floor and use it as a monitor, or put it on a stand to project sound on stage or as a studio monitor. The compact size and power give this Mackie C200 10″ 2-Way Compact Passive SR Loudspeaker the durability and versatility to do what you want. The Mackie C200 is used for sound projection. The custom LF drivers can output up 500 watts of peak power. This is aloud by using a 2-inch voice coil that can handle such wattage with a cone tuned to reproduce accurately any frequency between 59 Hz – 3000 Hz. Couple them with a high frequency titanium driver and horn able to reproduce the higher frequencies you get complete tonal separation for accurate sound dispersion at any volume. Built-in the Mackie C200 is a Low Impedance Compensated Crossover, pre-tuned for you to provide the correct balance of frequencies to send to the HF and LF while allowing you to add more C200s to your sound without worrying about EQ differences. In total for all this technology the Mackie C200 remains very affordable.
Mackie C300z 12″ 2-Way Compact Passive SR Loudspeaker if your looking for massive, accurate output from your loudspeaker and a piece of gear equipment that's going to last and aren't afraid of a few thumps or strong bass hits Mackie's got you covered! The Mackie C300z 12″ 2-Way Compact Passive SR Loudspeaker is an unpowered loudspeaker a ton of power. For maximum sound dispersal, the C300z sports components from the ubiquitous SRM450 with custom design and tuning by Eastern Acoustic Works. Your audience will hear you loud and most importantly crisp and clear!
Mackie Caster Kit for HD1801 Subwoofer The ultimate accessory for your Mackie AAC-CK100 HD1801 subwoofer. When the bass is pounding and the party is rockin! At the end of the night when your exhausted and left to break down and load up alone a nice solid set of casters will make a huge difference! The ultimate investment for all kinds of rocking or mixing. Give yourself a break and get the set up your hard work deserves. Never be stuck with heavy equipment to load up and carry out all alone at the end of a gig. Without a doubt every owner of the HD1801 Subwoofer needs this Mackie ACC-CK100 Caster Kit for their HD1801 Subwoofer
Mackie CFX16MKII 16-Channel/4-bus Compact SR Mixer w/ Effects 16 CHANNELS OF MACKIE MIXING WITH SUPERB BUILT-IN EFFECTS built to take annoyance out of mixing live performances, Mackie’s CFX16MKll Series compact live sound mixers feature true Mackie mic preamps, four subgroups, precise nine-band stereo graphic equalizers for greater sonic control, and onboard EMAC™ 32-bit digital effects—eliminating the need for outboard effects processors and cables. Combined with Mackie Active loudspeakers, the CFX16MKll mixers are part of a complete, easy-to-use Mackie sound system. Impact-resisting rubber side panels for better durability, ergonomic updates including sturdier more precise Onyx Series knobs, new graphics for better visibility in poor lighting conditions
Mackie CFX20MKll 20-Channel/4bus Compact SR Mixer w/Effects Features
• High-headroom mic preamps with RF rejection
• 20 channels (16 mic/line mono, and 2 stereo line channels)
• 32-bit EMAC(tm) digital effects with 9 reverbs, 4 delays, phaser, chorus, flange; 2 parameter controls + EFX wide spatial expander
• External and internal EFX sends
• EFX to Monitor control
• 9-band stereo graphic equalizer
• Inserts on all mic channels and main mix
• True 4-bus design with direct sub outs and L/R assign
• 2 Pre/Post Aux sends and internal/external FX level sends on each channel
• 3-band EQ with swept mid (100Hz to 8kHZ) on mic/line channels
• 4-band EQ on stereo line channels
• Pan, Mute, PFL solo on each channe
• Inserts and 100Hz low-cut filters on all mic/line channels
• Subwoofer output from built-in 18dB/oct. 75Hz crossover
• Ingenious BREAK switch
• Headphone output with level control
• Tape/CD inputs with level control assignable to Main Mix via Break switch
• Logarithmic taper 60mm faders
• 48V phantom power
• 12V BNC lamp jack
Mackie DL1608 16-Channel Digital Live Sound Mixer allows the entire process of live-sound mixing to be controlled by an iPad. The DL1608 comes stacked with 16 Onyx microphone preamps, 24-bit A/D & D/A converters, powerful internal DSP processing and an iPad docking faceplate. Integrate your Apple iPad and have the full setup for a live sound mixing experience. Take advantage of the iPad's touch screen capabilities and wireless control. Use Mackie's Master Fader app to mix live audio and access the DL1608's internal processing, including 4 band EQ, compression, gate, delay, reverb and 31-band graphic EQ. Add a wireless router and mix with your iPad remotely, at diffrent locations of a venue, hall, theater, etc. The Mackie DL1608 16 Channel Digital Live Sound Mixer with IPad Control add's flexibility and features like Channel Images allow you to take pictures of band members and use the images as channel markers for easy referencing. Conrol the Mix From any location With the Mackie DL1608's seamless wired to wireless mixing capabilities. mix in real time from anywhere in the venue on your iPad Instantly adjust mix functions from tuning front of house trouble spots or on stage monitors.
.Mackie FB221 Flybar for HDA & HD1808 made to fit the HDA & 1801 Speakers is attached to the HDA loudspeaker and the HD1801 Subwoofer Allowing them to be fully suspended overhead with the Mackie ACC-R280S rigging kit. This Mackie flybar was carefully designed just to fit your Mackie FB221 Flybar for HDA & HD1801 HDA & HD1801 Comes with stacked with Two FB221 included in this optional kit. Purchasing additional FB221s will be necessary to allow you to hang (fly) up to 4 HDA speakers at once. This Mackie FB221 Flybar for HDA & HD1801 is used for hanging overhead sound in any setting where max sound is needed including arenas, gyms , theaters , auditoriums, etc. Use this fly bar for safe hanging and flying techniques.
Mackie HDA Service Rigging Kit L (Left) Replacement For HDA No need for more hardware this Mackie HDA Service Rigging Kit L(Left) replacement includes all the hardware necessary to rig or suspend the Mackie HDA series loudspeakers in fixed installation applications. Always remember to have your professional sound installed by a licensed and insured contractor for the safety of your viewers and listeners. Always Make sure your Mackie equipment is installed the proper and safe way. Use this HDA Rigging Kit L (Left) to Suspend your HDA series speakers for long lasting use and quality sound !
Mackie HDA Service Rigging Kit R (Right) Replacement For HDA (Right) No need for more hardware this Mackie HDA Service Rigging Kit R (Right) replacement includes all the hardware necessary to rig (suspend) the Mackie HDA series loudspeakers in fixed installation applications. Always remember to have your professional sound installed by a licensed and insured contractor for the safety of your viewers and listeners. Always Make sure your Mackie equipment is installed the proper and safe way. Use this HDA Rigging Kit R (Right) to Suspend your HDA series speakers for long lasting use and quality sound ! Sound Ethics carries all your Mackie Needs along with tons of other manufacturers and products. Check out what Sound Ethics has to offer today !
Mackie HDA Service Rigging Pin Kit Replacement Rigging Pin and Lanyard for HDA and HD1801 Mackie HDA Service Rigging Pin Kit