- No products in the cart.
FEATURED PRODUCTS
- Details
The is the latest and greatest XLS amp from Crown! Delivering an astonishing 2400 watts RMS (1200 x 2 @ 2 ohm stereo) and 2400w RMS at 4Ω mono! Yes, this amp is 2 ohm stable and sounds amazing while doing it! Suitable for pro or home audio use! Amp up your current system (pun intended) with the new Crown XLS Drivecore 2 Series Amplifiers!
- Details
The is the latest and greatest XLS amp from Crown! Delivering an astonishing 1550 watts RMS (775 x 2 @ 2 ohm stereo/4 ohm mono) and 2400w Peak at 4Ω! Yes, this amp is 2 ohm stable and sounds amazing while doing it! Suitable for pro or home audio use! Amp up your current system (pun intended) with the new Crown XLS Drivecore 2 Series Amplifiers!
- Details
JBL EON 615 15″ Powered Loudspeaker
The JBL EON 615 15″ Powered Loudspeaker brings you the latest technology in cabinet materials, acoustic science and transducer design. You’ll find that it’s also extremely user friendly. JBL delivers top of the line quality to a high-end studio monitor in a fully professional, highly flexible, easy to use, portable system designed specifically for working musicians and sound providers.
- Details
Rockustics Pavarocci Rock Series 8″ Coaxial Rock Speaker the unique look of weathered sedimentary rock in a 2-way, 70 watt speaker featuring the Sweet Spot system. Extremely versatile speaker for use in large patios to small pool areas. 8″ coaxial driver, 4 ohm impedance. Dual voice coil, dual tweeter. Dimensions: 13.5″ X 16″ X 12.5″. Weight: 24 lbs No 70/100 volt option. Color Options: brown, gray or sandstone.
- Details
FEATURES
Four models for low-impedance applications
ISA 1350 drives 70V lines directly with 1500 watts / channel
Three “Ti” versions include low-impedance and isolated 25, 70, and 100 volt outputs for distributed audio systems
Rear panel gain controls for tamper resistant operation with 2 dB detents for quick and repeatable settings
XLR and detachable Euro style input connectors
DataPort V2 for use with DPV2-compatible signal processing accessories (XC-3, SF-3, LF-3) and DSP-3/DSP-4 (with external power supply)
Independent defeatable clip limiters for reduced distortion
Selectable high-pass filters protect speakers and prevent speaker transformer saturation with minimal effect on program material (30 Hz or 70 Hz on non-“Ti” models, 50 Hz or 75 Hz on “Ti” models)
Class H complementary bipolar output circuitry reduces AC power draw and waste heat by 40% on ISA 750 and 800Ti, and by 50% on ISA 1350
Front panel indicators include power, signal, and clip (and protect on ISA 1350)
Covered barrier strip output connectors for safety agency compliance
Automatic variable-speed fan for quiet normal operation with maximum cooling on demand
Rear-to-front air flow keeps equipment racks cool
Stereo, Bridge, or Parallel operating modes
Comprehensive protection circuitry including DC, infrasonic, thermal overload and short circuit protection
3-year warranty plus optional 3-year extended service contract - Details
8 ohms 20 Hz-20 kHz 0.1% THD 260W
4 ohms 20 Hz-20 kHz 0.1% THD 425W
2 ohms 1 kHz 1% THD 700W
XF OUTPUT POWER, STEREO MODE
70V or 100V 50 Hz-16 kHz 0.5% THD 500W
25V 50 Hz-16 kHz 0.5% THD 300WBRIDGED MONO MODE
8 ohms 1 kHz 0.1% THD 900W4 ohms 1 kHz 1% THD 1400W
XF OUTPUT POWER, BRIDGED MONO MODE
140V or 200V 50 Hz-16 kHz 0.5% THD
- Details
The Ruckus 6 (in Gray Granite) is a huge upgrade in both aesthetics and performance. This landscape speaker is the ideal choice for gardens, backyards, flower beds and any other natural outdoor environment. The new rock inspired enclosures are made of reinforced poly-resin that matches the color of the U.V. weather-resistant lacquer coating that covers the speaker. The result is a stone finish that, even if chipped or marred, will simply expose the same color and texture underneath. This means the speaker will look good and sound good for years to come. New driver elements and crossover networks have resulted in higher fidelity and greater sound pressure levels. Now the backyard can literally be filled with sound that rivals the finest indoor systems.
- Details
.
The Outdoor Elements OE8 Three speaker features ported enclosures to dramatically enhance low frequency response, while midrange and high frequencies are produced using advanced aluminum cone and dome drivers, respectively. This Speaker is available in white and black.
- Details
Shure SM57-LC Microphone is a unidirectional dynamic microphone and a true professional microphone used in many applications including the USA’s presidential podium for over 3 decades. The Shure SM57-LC Microphone is a great choice for musical instrument pickup or for vocals. With its bright, clean sound and carefully contoured presence rise, the SM57-LC is ideal for live sound reinforcement and recording. It has an extremely effective cardioid pickup pattern which isolates the main sound source while minimizing background noise.
- Details
Shure 514B Voice Communication Microphone Specs
Transducer Dynamic Polar Pattern Omnidirectional Frequency Response 100Hz to 6kHz Dynamic Range (Typical) Not Specified By Manufacturer Signal-to-Noise Ratio Not Specified By Manufacturer Maximum Input Sound Level Not Specified By Manufacturer Power Requirements No Output Impedance Microphone Rated Impedance 150 ohms (200 ohms actual)
Connection to Microphone Inputs Rated at 19 to 300 ohmsOutput Connectors Unterminated 4-conductor lead wire Pad No Low Frequency Roll-Off No Dimensions (WxHxD) 2.62 x 1.76 x 3.69″ (52.4 x 72.2 x 39.7mm) Weight 7 oz (200 g) - Details
Shure 522 Desktop Microphone
Microphone Type Dynamic Polar Pattern Cardioid Frequency Response 60Hz-11kHz Output Impedance 150 ohms Color Black Connector No Connector Weight 2.25 lbs. Manufacturer Part Number 522
PreviousNext
LATEST PRODUCTS
- Details
6.5″ IP4-ADDRESSABLE 4 SPEAKER CAT 5 OR 6 SYSTEM
Offering an economical option for expansion of audio coverage in a digital speaker system, this DanteTM-addressable coaxial in-ceiling speaker has output terminals for connection and power of up to three additional standard CM62-BGM speakers. The speaker incorporates one 6.5 inch (165 mm) polypropylene woofer with rubber surround and one 1.0 inch (25.4 mm) silk dome tweeter. BroadBeam Ring™ technology and a tuned port on the baffle provide smooth off-axis performance, mid-range clarity and bass response to 60 Hz (-10 dB). Low latency digital audio, power, and control are delivered to the speaker via standard category cable; connection is made on the other end to the STNet-Switch or other PoE / PoE+ switch. May also be powered via a 24V DC barrel connector for non-PoE installations. Configuration and zoning of the speaker are accomplished via software. When combined with standard speakers, the four-speaker cluster can be split and configured to handle two separate channels of audio. Mounting hardware is included and features SoundTube’s SpeedWing™ constant-tension fixed-wing mounting system, which accommodates material thicknesses ranging from 0.035 in (0.9 mm) to 2.38 in (60.4mm). UL 60065 and 2043 listed. Included accessories: Color-coded (green) tile bridge, UL listed conduit clamp and paint shield.Frequency Response (± 3 dB) 60Hz – 20kHz
Frequency Response (±10 dB) 55Hz – 20kHz
Max. Power SPL @ 1 M 93.0 dB
Transducer – Low Frequency Driver 6.5″ Polypropylene Cone with Butyl Rubber Surround
Transducer – High Frequency Driver 1″ Silk dome w/ BroadBeam Ring™
Certifications UL 60950 on STNet-Switch & Power Supply; UL 60065 on speakers; CE & CB on all
Total Bi-Amp Power 40 W
Colors White / Custom
Connections RJ45 ethernet connector
Backcan Diameter 245.6 mm / 9.67 in
Backcan Height 146.1 mm / 5.75 in.
Visible Diameter 298.5 mm / 11.75 in
Visible Height 8.6 mm / 0.34 in
Weight 3.6 kg / 8.0 lbs
Shipping Weight 4.1 kg / 9.0 lbs
Accessories Optional Color-coded (green) pre-construction bracket (AC-CM6-8EZ-PCB) - Details
5.25″ IP4-ADDRESSABLE 4 SPEAKER CAT 5 OR 6 SYSTEM
Offering an economical option for expansion of audio coverage in a digital speaker system, this DanteTM-addressable coaxial in-ceiling speaker has output terminals for connection and power of up to three additional standard CM52-BGM speakers. The speaker incorporates one 5.25 inch (134 mm) polypropylene woofer with rubber surround and one 0.75 inch (19 mm) silk dome tweeter. BroadBeam Ring™ technology and a tuned port on the baffle provide smooth off-axis performance, mid-range clarity and bass response to 65 Hz (-10 dB). Low latency digital audio, power, and control are delivered to the speaker via standard category cable; connection is made on the other end to the STNet-Switch or other PoE / PoE+ switch. May also be powered via a 24V DC barrel connector for non-PoE installations. Configuration and zoning of the speaker are accomplished via software. When combined with standard speakers, the four-speaker cluster can be split and configured to handle two separate channels of audio. Mounting hardware is included and features SoundTube’s SpeedWing™ constant-tension fixed-wing mounting system, which accommodates material thicknesses ranging from 0.035 in (0.9 mm) to 2.38 in (60.4mm). UL 60065 and 2043 listed. Included accessories: Color-coded (orange) tile bridge, UL listed conduit clamp and paint shield.Frequency Response (± 3 dB) 90 Hz – 20 kHz
Frequency Response (±10 dB) 65 Hz – 22 kHz
Max. Power SPL @ 1 M 93.0 dB
Transducer – Low Frequency Driver 5.25″ Polypropylene Cone w/ Butyl Rubber Surround
Transducer – High Frequency Driver 0.75″ Silk dome w/ BroadBeam Ring™
Certifications UL 60950 on STNet-Switch & Power Supply; UL 60065 on speakers; CE & CB on all
Total Bi-Amp Power 40 W
Colors White / Custom
Connections RJ45 ethernet connector
Backcan Diameter 245.6 mm / 9.67 in
Backcan Height 146.1 mm / 5.75 in.
Visible Diameter 298.5 mm / 11.75 in
Visible Height 8.6 mm / 0.34 in
Weight 3.6 kg / 8.0 lbs.
Shipping Weight 4.1 kg / 9.0 lbs.
Accessories Optional Color-coded (orange) pre-construction bracket (AC-CM6/8-PCB) - Details
Dual 3″ 2-Way Ultra-Thin Front and Surround Channel
The TFS 1.0 (Thin Front Surround), just as the name implies, can be used as fronts and surrounds: left, center, right, or any configuration of surround channels, in either a vertical or a horizontal orientation. The TFS speakers come with a wall mount and a horizontal tabletop stand in the box. You can create an entire surround sound system using only the TFS speakers and a subwoofer of your choosing.For optimal sound, pair the TFS with the P3-35 3-Channel amplifier.
Nominal Impedance 8 ohms
Sensitivity dB @ 2.83V/1M 90 dB
Frequency Response (1) 65 Hz – 20 kHz
Recommended Power 15 – 100 Watts
Transducer – Low Frequency Driver 3″ Ultra-Long Throw Polypropylene w/ NBR Surround
Transducer – High Frequency Driver (3) .75″ Silk/Synthetic Soft Dome
Colors Black Extruded Aluminum
Inputs Euro Block Connector
Height (SM = Height) 171.4 mm / 6.75″
Diameter (SM = Width) 469.9 mm / 18.5″
Depth 38.1 mm / 1.5″
Weight 2.6 kg / 5.8 lb
Shipping Weight 3.6 kg / 8.0 lb
Accessories Optional Smoked Acrylic Tabletop Stand (TPB-1)
Owner’s Manual – color Download Owners Manual
Regulatory – CE approved
Regulatory – RoHS approved - Details
2-Way Ultra-Thin CLR Front Channel Speaker
The TCE 1.5 is a “thin center eliminator” – What is a “center eliminator”? It is a system that provides discreet, three-channel performance out of only two speaker cabinets. The upper portions of both speakers handle the dedicated left and right content, but the lower portions of each TCE act as mono center channels which are then fed the same center mix from your source. This creates the illusion that there is a center channel speaker right in the middle of your left and right speakers.The TCE solves a common installation problem where, for one reason or another, a dedicated center channel speaker cannot be installed or mounted. The TCE can be wall-mounted or used with the smoked acrylic table-top stand included in the box.
For optimal sound, pair the TCE with the P3-35 3-Channel amplifier.
Nominal Impedance 8 ohms
Sensitivity dB @ 2.83V/1M 90 dB
Frequency Response (1) 65 Hz – 20 kHz
Recommended Power 15 – 100 Watts
Transducer – Low Frequency Driver 3″ Ultra-Long Throw Polypropylene w/ NBR Surround
Transducer – High Frequency Driver LR: .75″ Silk/Synthetic Soft Dome Center: .75″ Silk/Synthetic Soft Dome
Colors Black Extruded Aluminum
Inputs (2) Euro Block Connectors
Height (SM = Height) 171.4 mm / 6.75″
Diameter (SM = Width) 673.1 mm / 26.5″
Depth 38.1 mm / 1.5″
Weight 3.8 kg / 8.35 lb
Shipping Weight 5.0 kg / 11 lb
Owner’s Manual – color Download Owners Manual
Regulatory – CE approved
Regulatory – RoHS approved - Details
Smart Amp
The Smart Amp is an automatic volume control unit. The Smart Amp acts as an unseen staff member, automatically adjusting the volume of any player as the surrounding room noise goes up and down. Volume of your Secret Sound speaker will stay consistent even as a brass band goes by! The Smart Amp “listens” to the room through a small remote microphone, and adjusts the player volume as needed to retain your setting. The Smart Amp also includes an internal 6-watt amplifier that is sufficient to power a Secret Sound speaker, making it the perfect system for unamplified computer audio output. Installation is easy, and you need only to provide speaker wire to connect the Smart Amp to your sound source and the remote microphone. - Details
6.5″ IP4-ADDRESSABLE 4 SPEAKER CAT 5 OR 6 SYSTEM
One 6.5 inch (165 mm) polypropylene woofer with rubber surround and one 1.0 inch (25.4 mm) silk dome tweeter. The IP4-CM52-BGM master speaker has output terminals that will power up to 3 additional IP-CM52-BGM speakers from a CAT5 or 6 run.Sensitivity dB @ 2.83V/1M 88 dB
Frequency Response (± 3 dB) 80 Hz – 20 kHz
Frequency Response (±10 dB) 60 Hz – 22 kHz
Max. Program Power 40 W
Max. Power SPL @ 1 M 105 dB
Transducer – Low Frequency Driver 6.5″ Polypropylene Cone with Butyl Rubber Surround
Transducer – High Frequency Driver 1″ Silk Dome
Colors White / Custom
Inputs RJ45 ethernet connector
Backcan Diameter 245.6 mm / 9.67 in
Backcan Height 146.1 mm / 5.75 in
Visible Diameter 298.5 mm / 11.75 in
Visible Height 8.6 mm / 0.34 in
Weight 3.6 kg / 8 lbs
Shipping Weight 4.1 kg / 9 lbs
Accessories Optional Pre-Construction Bridge (AC-CM6-8EZ-PCB)
Regulatory – CE approved - Details
5.25″ IP4-ADDRESSABLE 4 SPEAKER CAT 5 OR 6 SYSTEM
One 5.25 inch (134 mm) polypropylene woofer with rubber surround and one 0.75 inch (19 mm) silk dome tweeter. The IP4-CM52-BGM master speaker has output terminals that will power up to 3 additional IP-CM52-BGM speakers from a CAT5 or 6 run.Sensitivity dB @ 2.83V/1M 89 dB
Frequency Response (± 3 dB) 90 Hz – 20 kHz
Frequency Response (±10 dB) 65 Hz – 22 kHz
Max. Program Power 40 W
Max. Power SPL @ 1 M 100.5 dB
Transducer – Low Frequency Driver 5.25″ Polypropylene Cone w/ Butyl Rubber Surround
Transducer – High Frequency Driver .75″ Silk Dome
Colors White / Custom
Inputs RJ45 ethernet connector
Backcan Diameter 245.6 mm / 9.67 in
Backcan Height 146.1 mm / 5.75 in
Visible Diameter 298.5 mm / 11.75 in
Visible Height 8.6 mm / 0.34 in
Weight 3.6 kg / 8 lbs
Shipping Weight 4.1 kg / 9 lbs
Accessories Optional Pre-Construction Bracket (AC-CM6-PCB)
Regulatory – CE approved - Details
LARGE PRODUCT IMAGEIP-CM82-BGM DRAWINGINSTALLATION GUIDEGLLTECH SHEETEXPORT SPECIFICATIONS
8.0″ COAXIAL IN-CEILING BACKGROUND MUSIC SPEAKER
One 8.0 inch (203 mm) polypropylene woofer with butyl rubber surround and one 1.0 inch (25 mm) silk dome tweeter. BroadBeam Ring™ technology for mid-range clarity and smooth off axis performance. Tuned port on baffle for added musicality and bass response down to 55 Hz (-10 dB). Reduced amplification costs and maxi¬mum efficiency of 86.0 dB sensitivity, 16 ohm impedance. Incorporates a painted steel grille for last¬ing durability. Adaptable to material thicknesses ranging from 0.035 inch (0.9 mm) to 1.6 inch (40.6 mm). UL 60065 & UL 2043 listed. Included accessories: Tile bridge, UL listed 0.5-inch conduit clamp, paint shield. Includes 40 watt bi-amplified speaker with DSP and CobraNet for audio distribution and feedback on speaker condition. Equipped with RJ45 ethernet connector and 24V DC barrel connector for local power (non-PoE installation).Sensitivity dB @ 2.83V/1M 89 dB
Sensitivity dB @ 1W/1M (2) 89 dB
Frequency Response (± 3 dB) 70Hz-18kHz
Frequency Response (±10 dB) 55Hz-22kHz
Max. Program Power 128 W
Max. Continuous Power RMS 64 W
Power Output 40 W
Max. Power SPL @ 1 M 107 dB
Directivity Factor (Q) (Averaged 100Hz – 10kHz, @ 2kHz) 5.4 (averaged 100 Hz – 10 kHz) ; 7.2 (2 kHz)
Directivity Index (DI) dB (Averaged 100Hz – 10kHz, @ 2kHz) 5.5 dB (averaged 100 Hz – 10 kHz) ; 8.6 dB (2 kHz)
Transducer – Low Frequency Driver 8″ Polypropylene Cone w/ Butyl Rubber Surround
Transducer – High Frequency Driver 1″ Silk Dome
Network Type: Low Pass 12 dB per octave, 2nd order
Network Type: High Pass 12 dB per octave, 2nd order
Colors White / Custom
Connections Four position ceramic terminal strip
Inputs RJ45 ethernet port
Backcan Diameter 245.6 mm / 9.67 in
Backcan Height 203.2 mm / 8 in
Visible Diameter 298.5 mm / 11.75 in
Visible Height 8.6 mm / 0.34 in
Mounting Hole Diameter 266.7 mm / 10.5 in
Weight 4.1 kg / 9 lbs
Shipping Weight 4.5 kg / 10 lbs
Accessories Optional Pre-Construction Bridge (AC-CM6-8EZ-PCB)
Packaging One per box
Regulatory – UL Pending 1480 & 2043
Regulatory – CE approved
Regulatory – RoHS approved
[BECOME AN AUTHORIZED DEALER NOW!] - Details
6.5″ COAXIAL IN-CEILING BACKGROUND MUSIC SPEAKER
One 6.5 inch (165 mm) polypropylene woofer with rubber surround and one 1.0 inch (25.4 mm) silk dome tweeter. BroadBeam Ring™ technology for mid-range clarity and smooth off axis performance. Tuned port on baffle for added musicality and bass response down to 64 Hz (-10 dB). Reduced amplification costs and maxi¬mum efficiency of 85.0 dB sensitivity, 16 ohm impedance. Incorporates a painted steel grille for last¬ing durability. Adaptable to material thicknesses ranging from 0.035 inch (0.9 mm) to 1.6 inch (40.6 mm). UL 60065 & UL 2043 listed. Included accessories: Tile bridge, UL listed 0.5 inch conduit clamp, paint shield. Includes 40 watt bi-amplified speaker with DSP and CobraNet for audio distribution and feedback on speaker condition. Equipped with RJ45 ethernet connector and 24V DC barrel connector for local power (non-PoE installation).Sensitivity dB @ 2.83V/1M 88.0 dB
Sensitivity dB @ 1W/1M (2) 88.0 dB
Frequency Response (± 3 dB) 54 Hz – 20 kHz
Frequency Response (±10 dB) 50 Hz – 22 kHz
Max. Program Power 100 W
Max. Continuous Power RMS 50 W
Max. Power SPL @ 1 M 105.0 dB
Directivity Factor (Q) (Averaged 100Hz – 10kHz, @ 2kHz) 5.1 (averaged 100 Hz – 10 kHz) ; 5.0 (2 kHz)
Directivity Index (DI) dB (Averaged 100Hz – 10kHz, @ 2kHz) 6.2 dB (averaged 100 Hz – 10 kHz) ; 7.0 dB (2 kHz)
Transducer – Low Frequency Driver 6.5″ Polypropylene Cone w/ Rubber Surround
Transducer – High Frequency Driver 1″ Silk Dome
Network Type: Low Pass 12 dB per octave, 2nd order
Network Type: High Pass 6 dB per octave, 1st order
Colors White / Custom
Connections Four position ceramic terminal strip
Inputs RJ45 ethernet port
Backcan Diameter 245.6 mm / 9.67 in
Backcan Height 146.1 mm / 5.75 in
Visible Diameter 298.5 mm / 11.75 in
Visible Height 8.6 mm / 0.34 in
Weight 3.6 kg / 8 lbs
Shipping Weight 4.1 kg / 9 lbs
Accessories Optional Pre-Construction Bridge (AC-CM6-8EZ-PCB)
Packaging One per box
Regulatory – UL Pending 1480 & 2043
Regulatory – CE approved
Regulatory – RoHS approved - Details
5.25″ COAXIAL IN-CEILING BACKGROUND MUSIC SHALLOW BACKCAN SPEAKER
Engineered for applications with limited plenum space incorporating a SoundTube-specific shallow backcan with an installed depth of 3.5 inches. One 5.25 inch (134 mm) polypropylene woofer with rubber surround and one 0.75 inch (19 mm) silk dome tweeter. BroadBeam Ring™ technology for mid-range clarity and smooth off axis performance. Tuned port on baffle for added musicality and bass response down to 65 Hz (-10 dB). Reduced amplification costs and maximum efficiency of 84.5 dB sensitivity, 16 ohm impedance. Incorporates a painted steel grille for lasting durability. Adaptable to material thicknesses ranging from 0.035 inch (0.9 mm) to 1.6 inch (40.6 mm). UL 60065 &UL 2043 listed. Included accessories: Color-coded (orange) tile bridge, UL listed 0.5 inch conduit clamp, paint shield. Includes 40 watt bi-amplified speaker with DSP and CobraNet for audio distribution and feedback on speaker condition. Equipped with RJ45 ethernet connector and 24V DC barrel connector for local power (non-PoE installation).Sensitivity dB @ 2.83V/1M 87.5 dB
Sensitivity dB @ 1W/1M (2) 87.5 dB
Frequency Response (± 3 dB) 90 Hz – 20 kHz
Frequency Response (±10 dB) 65 Hz – 22 kHz
Max. Program Power 40 W
Max. Continuous Power RMS 20 W
Max. Power SPL @ 1 M 100.5 dB
Directivity Factor (Q) (Averaged 100Hz – 10kHz, @ 2kHz) 4.3 (averaged 100 Hz – 10 kHz) ; 4.2 (2 kHz)
Directivity Index (DI) dB (Averaged 100Hz – 10kHz, @ 2kHz) 5.7 dB (averaged 100 Hz – 10 kHz) ; 6.2 dB (2 kHz)
Transducer – Low Frequency Driver 5.25″ Polypropylene Cone w/ Rubber Surround
Transducer – High Frequency Driver .75″ Silk Dome
Network Type: Low Pass 12 dB per octave, 2nd order
Network Type: High Pass 12 dB per octave, 2nd order
Colors White / Custom
Connections Four position ceramic terminal strip
Inputs RJ45 ethernet port
Backcan Diameter 245.6 mm / 9.67 in
Backcan Height 95.3 mm / 3.75 in
Visible Diameter 298.5 / 11.75 in
Visible Height 8.4 mm / 0.33 in
Mounting Hole Diameter 266.7 mm / 10.5 in
Weight 3.6 kg / 8 lbs
Shipping Weight 4.1 kg / 9 lbs
Accessories Optional Pre-Construction Bracket (AC-CM6-PCB)
Packaging One per box
Regulatory – UL Pending 1480 & 2043
Regulatory – CE approved
Regulatory – RoHS approved - Details
5.25″ COAXIAL IN-CEILING BACKGROUND MUSIC SPEAKER
One 5.25 inch (134 mm) polypropylene woofer with rubber surround and one 0.75 inch (19 mm) silk dome tweeter. BroadBeam Ring™ technology for mid-range clarity and smooth off axis performance. Tuned port on baffle for added musicality and bass response down to 65 Hz (-10 dB). Reduced amplification costs and maxi¬mum efficiency of 84.5 dB sensitivity, 16 ohm impedance. Incorporates a painted steel grille for lasting durability. Adaptable to material thicknesses ranging from 0.035 in. (0.9 mm) to 1.6 in. (40.6 mm). UL 60065 & 2043 listed. Included accessories: Color-coded (orange) tile bridge, UL listed conduit clamp, paint shield. Includes 40 watt bi-amplified speaker with DSP and CobraNet for audio distribution and feedback on speaker condition. Equipped with RJ45 ethernet connector and 24V DC barrel connector for local power (non-PoE installation).Sensitivity dB @ 2.83V/1M 84.5 dB
Sensitivity dB @ 1W/1M (2) 87.5 dB
Frequency Response (± 3 dB) 67 Hz – 20 kHz
Frequency Response (±10 dB) 56 Hz – 22 kHz
Max. Program Power 40 W
Max. Continuous Power RMS 20 W
Max. Power SPL @ 1 M 100.5 dB
Directivity Factor (Q) (Averaged 100Hz – 10kHz, @ 2kHz) 4.3 (averaged 100 Hz – 10 kHz) ; 4.2 (2 kHz)
Directivity Index (DI) dB (Averaged 100Hz – 10kHz, @ 2kHz) 5.7 dB (averaged 100 Hz – 10 kHz) ; 6.2 dB (2 kHz)
Transducer – Low Frequency Driver 5.25″ Polypropylene Cone w/ Rubber Surround
Transducer – High Frequency Driver .75″ Silk Dome
Network Type: Low Pass 12 dB per octave, 2nd order
Network Type: High Pass 12 dB per octave, 2nd order
Colors Black / White / Custom
Connections Four position ceramic terminal strip
Inputs RJ45 ethernet port
Backcan Diameter 245.6 mm / 9.67 in
Backcan Height 146.1 mm / 5.75 in
Visible Diameter 298.5 mm / 11.75 in
Visible Height 8.6 mm / .34 in
Mounting Hole Diameter 266.7 mm / 10.5 in
Weight 3.6 kg / 8 lbs
Shipping Weight 4.1 kg / 9 lbs
Accessories Optional Pre-Construction Bracket (AC-CM6-PCB), Pre-Construction Bracket (AC-CM8-PCB)
Packaging One per box
Regulatory – UL Pending 1480 & 2043
Regulatory – CE approved
Regulatory – RoHS approved - Details
IPD-SM82-EZ-II
The IPD-SM82-EZ-II is a Dante-enable, digital end-point solution in a surface-mount loud speaker. This speaker is Dante addressable and includes a 40W PoE amplifier for simplified installation and set up. Driver components consists of one 8.0 inch polypropylene woofer and one 1.0 inch soft dome tweeter in a ported enclosure. The included pre-mountable surface-mount bracket allows for quick and easy installation and the powder-coated aluminum grille keep the speaker looking good in most environments. The system is UL 60065 approved. Included accessories: Safety cable, wall mount bracket, conduit connector and optional port plug.Frequency Response (± 3 dB) 50 Hz – 20 kHz
Max. Power SPL @ 1 M 101.0 dB
Coverage Angles Horizontal / 90
Certifications UL 60065, CB
Height (SM = Height) 18.00 in (203.2 mm)
Diameter (SM = Width) 11.50 in (292.1 mm)
Weight 13.9 lbs (6.3 kg)
PreviousNext
On Sale Now!
-
Shure 522 Desktop Microphone
$154.99$149.99 -
JBL EON 612 12" Powered Loudspeaker
$449.00$399.99 -
JBL EON615 15" Two-Way Powered Speaker
$499.00$449.00 -
JBL EON 610 10" Powered Loudspeaker
$399.99$349.99 -
JBL EON206P Portable 6.5” Two-Way PA System
$449.00$399.99
On Sale Now!
-
Shure 522 Desktop Microphone
$154.99$149.99 -
JBL EON 612 12" Powered Loudspeaker
$449.00$399.99 -
JBL EON615 15" Two-Way Powered Speaker
$499.00$449.00 -
JBL EON 610 10" Powered Loudspeaker
$399.99$349.99 -
JBL EON206P Portable 6.5” Two-Way PA System
$449.00$399.99
